GlusterFS : Install2016/08/07 |
|
Install GlusterFS to Configure Storage Cluster.
It is recommended to use partitions for GlusterFS volumes which are different from the / partition.
The environment on this example is set as that sdb1 is mounted on /glusterfs directory for GlusterFS Configuration on all Nodes.
|
|
| [1] | Install GlusterFS Server on all Nodes in Cluster. |
|
[root@node01 ~]#
yum -y install centos-release-gluster38.noarch
[root@node01 ~]#
sed -i -e "s/enabled=1/enabled=0/g" /etc/yum.repos.d/CentOS-Gluster-3.8.repo # enable EPEL, too [root@node01 ~]# yum --enablerepo=centos-gluster38,epel -y install glusterfs-server /etc/rc.d/init.d/glusterd start [root@node01 ~]# chkconfig glusterd on |
| [2] | If IPTables is running, allow GlusterFS ports. For "-I INPUT 5" section below, Replace it to your own environment. |
|
[root@dlp ~]# iptables -I INPUT 5 -p tcp -m state --state NEW -m tcp --dport 24007 -j ACCEPT [root@dlp ~]# iptables -I INPUT 6 -p tcp -m state --state NEW -m tcp --dport 49152 -j ACCEPT |
| [3] |
Installing and Basic Settings of GlusterFS are OK. Refer to next section for settings of clustering.
|
| Sponsored Link |