NTP : Configure Server2019/11/12 |
|
Install Chrony to Configure NTP Server for Time Synchronization.
|
|
| [1] | Install and Configure Chrony. |
|
[root@dlp ~]#
dnf -y install chrony
[root@dlp ~]#
vi /etc/chrony.conf # line 3: change servers to synchronize (replace to your own timezone NTP server) # need NTP server itself to sync time with other NTP server # pool 2.centos.pool.ntp.org iburst
pool ntp.nict.jp iburst
# line 24: add network range to allow to receive time synchronization requests from NTP Clients # specify your local network and so on # if not specified, only localhost is allowed
allow 10.0.0.0/24
systemctl enable --now chronyd |
| [2] | If Firewalld is running, allow NTP service. NTP uses [123/UDP]. |
|
[root@dlp ~]# firewall-cmd --add-service=ntp --permanent success [root@dlp ~]# firewall-cmd --reload success |
| [3] | Verify it works normally. |
|
[root@dlp ~]# chronyc sources 210 Number of sources = 4 MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== ^- ntp-a3.nict.go.jp 1 6 17 8 -737us[ -737us] +/- 10ms ^- ntp-b3.nict.go.jp 1 6 17 8 -1502us[-1502us] +/- 10ms ^- ntp-b2.nict.go.jp 1 6 17 8 -2344us[-2344us] +/- 12ms ^* ntp-a2.nict.go.jp 1 6 17 9 +200us[ +852us] +/- 9250us |
| Sponsored Link |