NTP : Configure NTP Server2020/05/01 |
Install Chrony to Configure NTP Server for Time Synchronization.
|
|
[1] | Install and Configure Chrony. |
[root@dlp ~]#
dnf -y install chrony
[root@dlp ~]#
vi /etc/chrony.conf # line 3: change servers to synchronize (replace to your own timezone NTP server) # need NTP server itself to sync time with other NTP server # pool 2.centos.pool.ntp.org iburst
pool ntp.nict.jp iburst
# line 24: add network range to allow to receive time synchronization requests from NTP Clients # specify your local network and so on # if not specified, only localhost is allowed
allow 10.0.0.0/24
systemctl enable --now chronyd |
[2] | If Firewalld is running, allow NTP service. NTP uses [123/UDP]. |
[root@dlp ~]# firewall-cmd --add-service=ntp --permanent success [root@dlp ~]# firewall-cmd --reload success |
[3] | Verify it works normally. |
[root@dlp ~]# chronyc sources 210 Number of sources = 4 MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== ^- ntp-b2.nict.go.jp 1 6 17 7 +1639us[+1639us] +/- 10ms ^- ntp-a2.nict.go.jp 1 6 17 7 +3039us[+3039us] +/- 9619us ^* ntp-b3.nict.go.jp 1 6 17 8 +1756us[-1766us] +/- 12ms ^- ntp-a3.nict.go.jp 1 6 17 8 +4510us[+4510us] +/- 9627us |
Sponsored Link |