NTP : Configure NTP Server2022/05/13 |
|
Install Chrony to Configure NTP Server for Time Synchronization.
|
|
| [1] | Install and Configure Chrony. |
|
[root@dlp ~]#
dnf -y install chrony
[root@dlp ~]#
vi /etc/chrony.conf # line 3: change servers to synchronize (replace to your own timezone NTP server) # need NTP server itself to sync time with other NTP server # pool 2.centos.pool.ntp.org iburst
pool ntp.nict.jp iburst
# line 27: add network range to allow to receive time synchronization requests from NTP Clients # specify your local network and so on # if not specified, only localhost is allowed
allow 10.0.0.0/24
systemctl enable --now chronyd |
| [2] | If Firewalld is running, allow NTP service. NTP uses [123/UDP]. |
|
[root@dlp ~]# firewall-cmd --add-service=ntp success [root@dlp ~]# firewall-cmd --runtime-to-permanent success |
| [3] | Verify it works normally. |
|
[root@dlp ~]# chronyc sources MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== ^* ntp-a3.nict.go.jp 1 6 17 8 +183us[ -578us] +/- 9519us ^+ ntp-b3.nict.go.jp 1 6 17 8 -791us[-1552us] +/- 11ms ^- ntp-b2.nict.go.jp 1 6 17 7 -1707us[-1707us] +/- 11ms ^- ntp-a2.nict.go.jp 1 6 17 7 +349us[ +349us] +/- 8353us |
| Sponsored Link |