NTP : Configure NTP Server2022/11/18 |
Install Chrony to Configure NTP Server for Time Synchronization.
|
|
[1] | Install and Configure Chrony. |
[root@dlp ~]#
dnf -y install chrony
[root@dlp ~]#
vi /etc/chrony.conf # line 3: change servers to synchronize (replace to your own timezone NTP server) # need NTP server itself to sync time with other NTP server # pool 2.centos.pool.ntp.org iburst
pool ntp.nict.jp iburst
# line 27: add network range to allow to receive time synchronization requests from NTP Clients # specify your local network and so on # if not specified, only localhost is allowed
allow 10.0.0.0/24
systemctl enable --now chronyd |
[2] | If Firewalld is running, allow NTP service. NTP uses [123/UDP]. |
[root@dlp ~]# firewall-cmd --add-service=ntp success [root@dlp ~]# firewall-cmd --runtime-to-permanent success |
[3] | Verify it works normally. |
[root@dlp ~]# chronyc sources MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== ^? ntp-a3.nict.go.jp 1 6 1 1 +1891us[+1891us] +/- 8966us ^? ntp-a2.nict.go.jp 1 6 1 0 +1432us[+1432us] +/- 10ms ^? ntp-b3.nict.go.jp 1 6 1 1 +1015us[+1015us] +/- 11ms ^? ntp-b2.nict.go.jp 1 6 1 1 +1413us[+1413us] +/- 10ms |
Sponsored Link |