NTP : Configure NTP Server2023/04/21

	Install Chrony to Configure NTP Server for Time Synchronization.
[1]	Install and Configure Chrony.

[root@dlp ~]#

dnf -y install chrony

[root@dlp ~]#

vi /etc/chrony.conf

# line 3: change servers to synchronize (replace to your own timezone NTP server)
# need NTP server itself to sync time with other NTP server

pool 2.centos.pool.ntp.org iburst

pool ntp.nict.jp iburst

# line 27: add network range to allow to receive time synchronization requests from NTP Clients
# specify your local network and so on
# if not specified, only localhost is allowed

allow 10.0.0.0/24

[root@dlp ~]#

systemctl enable --now chronyd

[2]	If Firewalld is running, allow NTP service. NTP uses [123/UDP].

[root@dlp ~]#

firewall-cmd --add-service=ntp

success
[root@dlp ~]#

firewall-cmd --runtime-to-permanent

success

[3]	Verify it works normally.

[root@dlp ~]#

chronyc sources

MS Name/IP address         Stratum Poll Reach LastRx Last sample
===============================================================================
^? ntp-b2.nict.go.jp             1   6     3     2  -1112us[-1112us] +/-   10ms
^? ntp-k1.nict.jp                1   6     3     2   -906us[ -906us] +/- 7031us
^+ ntp-a2.nict.go.jp             1   6     7     1    -23us[-1545us] +/-   11ms
^* ntp-b3.nict.go.jp             1   6     7     1   +313us[-1210us] +/-   11ms

Matched Content