Fedora 41
Sponsored Link

NTP : Configure NTP Server2024/10/31

 
Install Chrony to Configure NTP Server for Time Synchronization.
[1] Install and Configure Chrony.
[root@dlp ~]#
dnf -y install chrony
[root@dlp ~]#
vi /etc/chrony.conf
# line 3 : change servers to synchronize (replace to your own timezone NTP server)
# need NTP server itself to sync time with other NTP servers

#
pool 2.fedora.pool.ntp.org iburst
pool ntp.nict.jp iburst
# line 27 : add network range to allow to receive time synchronization requests from NTP Clients
# specify your local network and so on
# if not specified, only localhost is allowed

allow 10.0.0.0/24
[root@dlp ~]#
systemctl enable --now chronyd

[2] If Firewalld is running, allow NTP service. NTP uses [123/UDP].
[root@dlp ~]#
firewall-cmd --add-service=ntp

success
[root@dlp ~]#
firewall-cmd --runtime-to-permanent

success
[3] Verify it works normally.
[root@dlp ~]#
chronyc sources

MS Name/IP address         Stratum Poll Reach LastRx Last sample
===============================================================================
^* ntp-b2.nict.go.jp             1   6    17    30   -109us[ +460us] +/- 9850us
^- ntp-b3.nict.go.jp             1   6    17    31  -1824us[-1824us] +/-   11ms
^- ntp-a2.nict.go.jp             1   6    17    31   -233us[ -233us] +/- 9829us
^- ntp-k1.nict.jp                1   6    17    31  -2041us[-2041us] +/- 8476us
Matched Content