NTP : Configure NTP Server2025/04/17 |
|
Install Chrony to Configure NTP Server for Time Synchronization. |
|
| [1] | Install and Configure Chrony. |
|
[root@dlp ~]#
dnf -y install chrony
[root@dlp ~]#
vi /etc/chrony.conf # line 3 : change servers to synchronize (replace to your own timezone NTP server) # need NTP server itself to sync time with other NTP servers # pool 2.fedora.pool.ntp.org iburst
pool ntp.nict.jp iburst
# line 27 : add network range to allow to receive time synchronization requests from NTP Clients # specify your local network and so on # if not specified, only localhost is allowed
allow 10.0.0.0/24
systemctl enable --now chronyd |
| [2] | If Firewalld is running, allow NTP service. NTP uses [123/UDP]. |
|
[root@dlp ~]# firewall-cmd --add-service=ntp success [root@dlp ~]# firewall-cmd --runtime-to-permanent success |
| [3] | Verify it works normally. |
|
[root@dlp ~]# chronyc sources MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== ^- ntp-a3.nict.go.jp 1 6 17 7 +874us[ +874us] +/- 8321us ^* ntp-b2.nict.go.jp 1 6 17 7 +67us[ -792us] +/- 10ms ^- ntp-k1.nict.jp 1 6 17 7 +669us[ +669us] +/- 8266us ^- ntp-a2.nict.go.jp 1 6 17 9 +284us[ +284us] +/- 9047us |
| Sponsored Link |
|
|