NTP : Configure NTP Server2021/07/19 |
Install Chrony to Configure NTP Server for Time Synchronization.
|
|
[1] | Install and Configure Chrony. |
[root@dlp ~]#
dnf -y install chrony
[root@dlp ~]#
vi /etc/chrony.conf # line 3 : change servers to synchronize (replace to your own timezone NTP server) # need NTP server itself to sync time with other NTP server # pool 2.centos.pool.ntp.org iburst
pool ntp.nict.jp iburst
# line 24 : add network range to allow to receive time synchronization requests from NTP Clients # specify your local network and so on # if not specified, only localhost is allowed
allow 10.0.0.0/24
systemctl enable --now chronyd |
[2] | If Firewalld is running, allow NTP service. NTP uses [123/UDP]. |
[root@dlp ~]# firewall-cmd --add-service=ntp success [root@dlp ~]# firewall-cmd --runtime-to-permanent success |
[3] | Verify it works normally. |
[root@dlp ~]# chronyc sources 210 Number of sources = 4 MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== ^- ntp-b2.nict.go.jp 1 6 17 3 -947us[ -947us] +/- 11ms ^- ntp-k1.nict.jp 1 6 17 4 -874us[ -874us] +/- 7094us ^* ntp-b3.nict.go.jp 1 6 17 5 -646us[ -709us] +/- 10ms ^- ntp-a3.nict.go.jp 1 6 17 5 +1433us[+1433us] +/- 7918us |
Sponsored Link |