OpenStack Grizzly - Configure Swift#3 (Storage Node)2013/08/23 |
Configure OpenStack Object Storage (Swift).
Swift consists 3 Nodes, it's Authentication Node, Proxy Node, Storage Node.
The example for Openstack of this site shows to configure All-in-One settings for Keystone, Glance, Cinder, Nova, Horizon, but on this Swift settings, configure a Node on another hosts like follows. (It uses Keystone Server as an Authentication Node) | +------------+ | +-----------+ | Auth Node |10.0.0.30 | 10.0.0.31| Proxy | | (Keystone) |------------+------------| Node | +------------+ | +-----------+ | +------------------------+-----------------------+ | | | |10.0.0.51 |10.0.0.52 |10.0.0.53 +-----------+ +-----------+ +-----------+ | Storage | | Storage | | Storage | | Node1 |------------| Node2 |-----------| Node3 | +-----------+ +-----------+ +-----------+ |
Configure Storage Node on here.
It's OK to set the same settings mostly on Storage Nodes, but IP address and Device number are different, though. Furthermore, add Hard drives on each Storage Nodes and create a partition "/dev/sdb1" for this settings. |
|
[1] | Install Swift-Account, Swift-Container, Swift-Object. |
# install from EPEL OpenStack, EPEL [root@node01 ~]# yum --enablerepo=epel-openstack-grizzly,epel -y install openstack-swift-account openstack-swift-container openstack-swift-object xfsprogs xinetd rsync openssh-clients
|
[2] | Format free space on disk (/dev/sdb1 on this example) with XFS and mount on /srv/node (the number "device*" is different on each Storage Nodes). |
[root@node01 ~]# mkfs.xfs -i size=1024 /dev/sdb1 meta-data=/dev/sdb1 isize=1024 agcount=4, agsize=6553514 blks = sectsz=512 attr=2, projid32bit=0 data = bsize=4096 blocks=26214055, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 log =internal log bsize=4096 blocks=12799, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0[root@node01 ~]# mkdir -p /srv/node/device0 [root@node01 ~]# mount -o noatime,nodiratime,nobarrier /dev/sdb1 /srv/node/device0 [root@node01 ~]# chown -R swift. /srv/node
[root@node01 ~]#
vi /etc/fstab # add at the last /dev/sdb1 /srv/node/device0 xfs noatime,nodiratime,nobarrier 0 0 |
[3] | Copy Swift Ring file from Swift Proxy Node to this Storage Node. |
[root@proxy ~]# scp /etc/swift/*.gz 10.0.0.51:/etc/swift/ The authenticity of host '10.0.0.51 (10.0.0.51)' can't be established. RSA key fingerprint is xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:f3:ed:54. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.0.51' (RSA) to the list of known hosts. root@10.0.0.51's password: account.ring.gz 100% 3867 3.8KB/s 00:00 container.ring.gz 100% 3899 3.8KB/s 00:00 object.ring.gz 100% 3877 3.8KB/s 00:00 |
[4] | Change owner for Swift Ring file. |
[root@node01 ~]# chown swift. /etc/swift/*.gz |
[5] | Configure Swift, Rsync. |
[root@node01 ~]#
vi /etc/swift/swift.conf # set the value which is set on Proxy Node [swift-hash] swift_hash_path_suffix = swift_shared_path
[root@node01 ~]#
vi /etc/swift/account-server.conf # line 2: change to own IP address bind_ip = 10.0.0.51
[root@node01 ~]#
vi /etc/swift/container-server.conf # line 2: change to own IP address bind_ip = 10.0.0.51
[root@node01 ~]#
vi /etc/swift/object-server.conf # line 2: change to own IP address bind_ip = 10.0.0.51
[root@node01 ~]#
vi /etc/rsyncd.conf # create new like follows pid file = /var/run/rsyncd.pid log file = /var/log/rsyncd.log uid = swift gid = swift address = 10.0.0.51 [account] path = /srv/node read only = false write only = no list = yes incoming chmod = 0644 outgoing chmod = 0644 max connections = 25 lock file = /var/lock/account.lock [container] path = /srv/node read only = false write only = no list = yes incoming chmod = 0644 outgoing chmod = 0644 max connections = 25 lock file = /var/lock/container.lock [object] path = /srv/node read only = false write only = no list = yes incoming chmod = 0644 outgoing chmod = 0644 max connections = 25 lock file = /var/lock/object.lock [swift_server] path = /etc/swift read only = true write only = no list = yes incoming chmod = 0644 outgoing chmod = 0644 max connections = 5 lock file = /var/lock/swift_server.lock |
[6] | Start services. |
[root@node01 ~]# chkconfig rsync on [root@node01 ~]# chkconfig xinetd on [root@node01 ~]# /etc/rc.d/init.d/xinetd start Starting xinetd: [ OK ] [root@node01 ~]# for ringtype in account container object; do
/etc/rc.d/init.d/openstack-swift-$ringtype start chkconfig openstack-swift-$ringtype on for service in replicator updater auditor; do if [ $ringtype != 'account' ] || [ $service != 'updater' ]; then /etc/rc.d/init.d/openstack-swift-$ringtype-$service start chkconfig openstack-swift-$ringtype-$service on fi done done Starting swift-account-server: [ OK ] Starting swift-account-replicator: [ OK ] Starting swift-account-auditor: [ OK ] Starting swift-container-server: [ OK ] Starting swift-container-replicator: [ OK ] Starting swift-container-updater: [ OK ] Starting swift-container-auditor: [ OK ] Starting swift-object-server: [ OK ] Starting swift-object-replicator: [ OK ] Starting swift-object-updater: [ OK ] Starting swift-object-auditor: [ OK ] |
Sponsored Link |