Eucalyptus - Install#2 - Configure Node Controler2013/02/24 |
|
Configure Node Controler.
This example shows to configure Eucalyptus on the environment below.
#1) frontend.srv.world
[10.0.0.30] ⇒ Control Server ( CLC, Walrus, SC, CC installed ) #2) node01.srv.world [10.0.0.40] ⇒ Node Controler ( NC installed, built KVM Host )
|
|
| [1] |
Configure as KVM Host first.
|
| [2] | Add some repositories to install Eucalyptus. |
|
[root@frontend ~]# yum -y install \
http://downloads.eucalyptus.com/software/eucalyptus/3.2/centos/6/x86_64/eucalyptus-release-3.2.noarch.rpm \ http://downloads.eucalyptus.com/software/euca2ools/2.1/centos/6/x86_64/euca2ools-release-2.1.noarch.rpm |
| [3] | Install Components. |
|
# enable EPEL
[root@frontend ~]#
yum --enablerepo=epel -y install eucalyptus-nc
[root@frontend ~]#
vi /etc/eucalyptus/eucalyptus.conf # line 22: uncomment CREATE_SC_LOOP_DEVICES=256 # line 165: change VNET_MODE=" SYSTEM "
# line 188: change ( specify bridge interface ) VNET_BRIDGE=" br0 "
/etc/rc.d/init.d/eucalyptus-nc start Starting Eucalyptus services: done. |
| Sponsored Link |