oVirt - Configure oVirt Node2014/06/15

	Configure oVirt Node. This example shows to configure on the environment below. (1) ovirt.srv.world [10.0.0.50] ⇒ oVirt Control Server ( up to 4G memory ) (2) node01.srv.world [10.0.0.40] ⇒ oVirt Node ( KVM Host configured ) (3) client.srv.world [10.0.0.30] ⇒ ClientPC ( Desktop Environment configured )
[1]	Configure the oVirt Node Server as a KVM Host first.
[2]	Configure as an oVirt Node.

[root@node01 ~]#

yum -y install http://resources.ovirt.org/pub/yum-repo/ovirt-release34.rpm

[root@node01 ~]#

yum -y install vdsm

[root@node01 ~]#

mv /etc/sysconfig/network-scripts/ifcfg-br0 /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt

[root@node01 ~]#

vi /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt

# change bridge name

DEVICE=

ovirtmgmt

[root@node01 ~]#

vi /etc/sysconfig/network-scripts/ifcfg-eth0

# change

BRIDGE=

ovirtmgmt

[root@node01 ~]#

Matched Content