GlusterFS 6 : Distributed Configuration2019/05/30 |
|
Configure Storage Clustering with GlusterFS.
For example, create a distributed volume with 2 Nodes.
This example shows to use 2 Nodes but it's possible to use more than 3 Nodes.
|
+----------------------+ | +----------------------+
| [GlusterFS Server#1] |10.0.0.51 | 10.0.0.52| [GlusterFS Server#2] |
| node01.srv.world +----------+----------+ node02.srv.world |
| | | |
+----------------------+ +----------------------+
⇑ ⇑
file1, file3 ... file2, file4 ...
|
|
It is recommended to use partitions for GlusterFS volumes which are different from the / partition.
The environment on this example is set as that sdb1 is mounted on [/glusterfs] directory for GlusterFS Configuration on all Nodes. |
|
| [1] | |
| [2] | Create a Directory for GlusterFS Volume on all Nodes. |
|
[root@node01 ~]# mkdir -p /glusterfs/distributed |
| [3] | Configure Clustering like follows on a node. (it's OK on any node) |
|
# probe the node [root@node01 ~]# gluster peer probe node02 peer probe: success. # show status [root@node01 ~]# gluster peer status Number of Peers: 1 Hostname: node02 Uuid: 39b0be1e-6b67-48d3-9e24-08f356fea9ae State: Peer in Cluster (Connected) # create volume [root@node01 ~]# gluster volume create vol_distributed transport tcp \ node01:/glusterfs/distributed \ node02:/glusterfs/distributed volume create: vol_distributed: success: please start the volume to access data # start volume [root@node01 ~]# gluster volume start vol_distributed volume start: vol_distributed: success # show volume info [root@node01 ~]# gluster volume info Volume Name: vol_distributed Type: Distribute Volume ID: 877b1de0-d8d1-49d4-958c-b1f455dbe7d5 Status: Started Snapshot Count: 0 Number of Bricks: 2 Transport-type: tcp Bricks: Brick1: node01:/glusterfs/distributed Brick2: node02:/glusterfs/distributed Options Reconfigured: transport.address-family: inet nfs.disable: on |
| [4] |
| Sponsored Link |