Create Virtual Machine #12010/05/27 |
| Install GuestOS and create Virtual Machine. This example shows to install Fedora 13. |
|
| [1] | Install on test mode via network, it's OK on Console or remote connection with Putty and so on. |
|
[root@dlp ~]# mkdir -p /var/kvm/images # create a directory for virtual machines [root@dlp ~]# virt-install \ -n www \ -r 1024 \ -f /var/kvm/images/www.img \ -s 20 \ --vcpus=2 \ --os-type linux \ --os-variant=fedora13 \ --network bridge=br0 \ --network bridge=br1 \ --nographics \ --location='http://ftp.riken.jp/Linux/fedora/releases/13/Fedora/x86_64/os/' \ --extra-args='console=tty0 console=ttyS0,115200n8' Starting install... # start installation |
| For options, make sure 'man virt-install', there are many options. -n specify the name of Virtual Machine -r specify the amount of memories of Virtual Machine -f specify the location of disks of Virtual Machine -s specify the amount of disks of Virtual Machine --vcpus=
specify the virtual CPUs
--os-type
specify types of GuestOS
--network=
specify network types of Virtual Machine
--nographics
nographics
--location=
specify location of installation where from
--extra-args=
specify parameters that is set in kernel
|
| [2] | Install with text mode, it's the same with common procedure of installation. After finishing installation, reboot first and then login prompt is shown like follwos. |
|
Fedora release 13 (Goddard) Kernel 2.6.33.3-85.fc13.x86_64 on an x86_64 (/dev/ttyS0) localhost.localdomain login: # login with root Password: [root@localhost ~]# |
| [3] | Move to GuestOS to HostOS with Ctrl + ] key. Move to HostOS to GuestOS with a command 'virsh console (name of virtual machine)'. |
|
[root@localhost ~]# # push Ctrl + ] [root@dlp ~]# # Host's console [root@dlp ~]# virsh console www # move to Guest Connected to domain www Escape character is ^] # Enter key [root@localhost ~]# # Guest's console |
| [4] | Because after installing GuestOS from network, it is minimum settings,
so it's useful to save it as a template in order to create new virtual machines later.
Please refer next procedure to create a new virtual machine from template below.
|
|
[root@localhost ~]# # Ctrl + ] [root@dlp ~]# # Host's console [root@dlp ~]# cp /var/kvm/images/www.img /root/guest.img # disk image [root@dlp ~]# cp /etc/libvirt/qemu/www.xml /root/guest.xml # XML file
|
| [5] | Set basic initial config to GuestOS first before using it. |
| Sponsored Link |