NTP Server : Configure NTPd2018/05/07 |
|
Install NTPd and Configure NTP server for time adjustment.
|
|
| [1] | Install NTPd. |
|
[root@dlp ~]#
dnf -y install ntp
[root@dlp ~]#
vi /etc/ntp.conf # line 21: add the network range you allow to receive requests restrict 10.0.0.0 mask 255.255.255.0 nomodify notrap # line 25: change servers for synchronization (replace to your timezone's one) # pool 2.fedora.pool.ntp.org iburst
server ntp.nict.jp iburst
server ntp1.jst.mfeed.ad.jp iburst systemctl start ntpd [root@dlp ~]# systemctl enable ntpd |
| [2] | If Firewalld is running, allow NTP service. NTP uses 123/UDP. |
|
[root@dlp ~]# firewall-cmd --add-service=ntp --permanent success [root@dlp ~]# firewall-cmd --reload success |
| [3] | Verify it works normally like follows. |
|
[root@dlp ~]# ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
*ntp-b3.nict.go. .NICT. 1 u 4 64 1 21.312 -2.440 1.515
+ntp1.jst.mfeed. 133.243.236.17 2 u 5 64 1 17.546 -0.237 1.441
|
| Sponsored Link |