iSCSI : Configure Target (tgt)2024/04/25

Configure Storage Server with iSCSI.
This is the example of configuring iSCSI Target with scsi-target-utils. (tgt)

Storage server with iSCSI on network is called iSCSI Target, Client Host that connects to iSCSI Target is called iSCSI Initiator.
This example is based on the environment like follows.

+----------------------+          |          +----------------------+
| [   iSCSI Target   ] |10.0.0.30 | 10.0.0.51| [ iSCSI Initiator  ] |
|     dlp.srv.world    +----------+----------+   node01.srv.world   |
|                      |                     |                      |
+----------------------+                     +----------------------+

[1]	Install administration tools.

[root@dlp ~]#

dnf -y install scsi-target-utils

[2]	Configure iSCSI Target. For example, create an disk-image under the [/var/lib/iscsi_disks] directory and set it as a SCSI device.

# create a disk image

[root@dlp ~]#

mkdir /var/lib/iscsi_disks

[root@dlp ~]#

dd if=/dev/zero of=/var/lib/iscsi_disks/disk01.img count=0 bs=1 seek=10G

[root@dlp ~]#

vi /etc/tgt/conf.d/target01.conf

# create new
# if you set some devices, add <target>-</target> and set the same way with follows
# naming rule : [ iqn.(year)-(month).(reverse of domain name):(any name you like) ]

<target iqn.2024-04.world.srv:dlp.target01>
    # provided device as a iSCSI target
    backing-store /var/lib/iscsi_disks/disk01.img
    # iSCSI Initiator's IQN you allow to connect
    initiator-name iqn.2024-04.world.srv:node01.initiator
    # authentication info ( set anyone you like for "username", "password" )
    incominguser username password
</target>

[3]	If SELinux is enabled, change SELinux Context.

[root@dlp ~]#

dnf -y install policycoreutils-python-utils

[root@dlp ~]#

chcon -R -t tgtd_var_lib_t /var/lib/iscsi_disks

[root@dlp ~]#

semanage fcontext -a -t tgtd_var_lib_t /var/lib/iscsi_disks

[4]	If Firewalld is running, allow iSCSI Target service.

[root@dlp ~]#

firewall-cmd --add-service=iscsi-target

success
[root@dlp ~]#

firewall-cmd --runtime-to-permanent

success

[5]	Start tgtd and verify status.

[root@dlp ~]#

systemctl enable --now tgtd

# show status

[root@dlp ~]#

tgtadm --mode target --op show

Target 1: iqn.2024-04.world.srv:dlp.target01
    System information:
        Driver: iscsi
        State: ready
    I_T nexus information:
    LUN information:
        LUN: 0
            Type: controller
            SCSI ID: IET     00010000
            SCSI SN: beaf10
            Size: 0 MB, Block size: 1
            Online: Yes
            Removable media: No
            Prevent removal: No
            Readonly: No
            SWP: No
            Thin-provisioning: No
            Backing store type: null
            Backing store path: None
            Backing store flags:
        LUN: 1
            Type: disk
            SCSI ID: IET     00010001
            SCSI SN: beaf11
            Size: 10737 MB, Block size: 512
            Online: Yes
            Removable media: No
            Prevent removal: No
            Readonly: No
            SWP: No
            Thin-provisioning: No
            Backing store type: rdwr
            Backing store path: /var/lib/iscsi_disks/disk02.img
            Backing store flags:
    Account information:
        username
    ACL information:
        ALL
        iqn.2024-04.world.srv:node01.initiator

Matched Content