Configure iSCSI Taregt(iscsitarget)2016/04/23

Configure Storage Server with iSCSI.

This is the example of configuring iSCSI Target with iscsitarget.

[1]	Install administration tools first.

root@dlp:~#

apt-get -y install iscsitarget iscsitarget-dkms

[2]	Configure iSCSI Target. For example, create a disk image under the [/var/iscsi_disks] directory and set it as a shared disk.

# create disk image

root@dlp:~#

mkdir /var/iscsi_disks

root@dlp:~#

dd if=/dev/zero of=/var/iscsi_disks/disk01.img count=0 bs=1 seek=10G

root@dlp:~#

vi /etc/default/iscsitarget

# change

ISCSITARGET_ENABLE=

true

root@dlp:~#

vi /etc/iet/ietd.conf

# add to the end

# naming rule : [ iqn.yaer-month.domain:any name ]

Target iqn.2016-04.world.srv:target00
    # provided devicce as a iSCSI target
    Lun 0 Path=/var/iscsi_disks/disk01.img,Type=fileio
    # iSCSI Initiator's IP address you allow to connect
    initiator-address 10.0.0.31
    # authentication info ( set anyone you like for "username", "password" )
    incominguser username password

root@dlp:~#

systemctl restart iscsitarget

# disolay status

root@dlp:~#

ietadm --op show --tid=1

Wthreads=8
Type=0
QueuedCommands=32
NOPInterval=0
NOPTimeout=0

Matched Content