Eucalyptus - Add Components2013/02/24

	Add Components. This example shows to configure Eucalyptus on the environment below. #1) frontend.srv.world [10.0.0.30] ⇒ Control Server ( CLC, Walrus, SC, CC installed ) #2) node01.srv.world [10.0.0.40] ⇒ Node Controler ( NC installed, built KVM Host )
[1]	Work on the Control Server.

# Add Cluster Controller ( specify any name you like for "cluster01", specify Control Server's IP for IP address )

[root@frontend ~]#

euca_conf --register-cluster cluster01 10.0.0.30

SERVICE cluster cluster01 cluster-10.0.0.30 NOTREADY 17 http://10.0.0.30:8774/axis2/services/EucalyptusCC arn:euca:eucalyptus:cluster01:cluster:cluster-10.0.0.30/
The authenticity of host '10.0.0.30 (10.0.0.30)' can't be established.
RSA key fingerprint is xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx.
Are you sure you want to continue connecting (yes/no)?

yes

Warning: Permanently added '10.0.0.30' (RSA) to the list of known hosts.
root@10.0.0.30's password:

# Control Server's root password

# Add Walrus ( specify Control Server's IP for IP address )

[root@frontend ~]#

euca_conf --register-walrus 10.0.0.30

Created new partition 'walrus'
SERVICE walrus walrus walrus-10.0.0.30 DISABLED 18 http://10.0.0.30:8773/services/Walrus arn:euca:bootstrap:walrus:walrus:walrus-10.0.0.30/
root@10.0.0.30's password:

# Control Server's root password

# Add Storage Controller ( specify Control Server's IP for IP address )

[root@frontend ~]#

euca_conf --register-sc cluster01 10.0.0.30

SERVICE storage cluster01 sc-10.0.0.30 BROKEN 21 http://10.0.0.30:8773/services/Storage arn:euca:eucalyptus:cluster01:storage:sc-10.0.0.30/
Registered the first storage controller in partition 'cluster01'. You must choose a storage back end with ``euca-modify-property -p cluster01.storage.blockstoragemanager=$BACKEND''
root@10.0.0.30's password:

# Control Server's root password

# Add Node Controller ( specify Node Controler's IP for IP address )

[root@frontend ~]#

euca_conf --register-nodes "10.0.0.40"

INFO: We expect all nodes to have eucalyptus installed in $EUCALYPTUS for key synchronization.
The authenticity of host '10.0.0.40 (10.0.0.40)' can't be established.
RSA key fingerprint is xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx.
Are you sure you want to continue connecting (yes/no)?

yes

Warning: Permanently added '10.0.0.40' (RSA) to the list of known hosts.
root@10.0.0.40's password:

# Node Controler's root password

...done

# get admin certificates

[root@frontend ~]#

euca_conf --get-credentials admin.zip

[root@frontend ~]#

unzip admin.zip

[root@frontend ~]#

source eucarc

# show status

[root@frontend ~]#

euca-describe-availability-zones verbose

AVAILABILITYZONE        cluster01       10.0.0.30 arn:euca:eucalyptus:cluster01:cluster:cluster-10.0.0.30/
AVAILABILITYZONE        |- vm types     free / max   cpu   ram  disk
AVAILABILITYZONE        |- m1.small     0008 / 0008   1    512     5
AVAILABILITYZONE        |- c1.medium    0004 / 0004   2    512    10
AVAILABILITYZONE        |- m1.large     0004 / 0004   2   1024    15
AVAILABILITYZONE        |- m1.xlarge    0004 / 0004   2   2048    20
AVAILABILITYZONE        |- c1.xlarge    0002 / 0002   4   4096    20

Matched Content