Ceph Nautilus : Use Block Device2019/06/12 |
|
Configure a Client Host [dlp] to use Ceph Storage like follows.
|
+--------------------+ |
| [dlp.srv.world] |10.0.0.30 |
| Ceph Client +-----------+
| | |
+--------------------+ |
+----------------------------+----------------------------+
| | |
|10.0.0.51 |10.0.0.52 |10.0.0.53
+-----------+-----------+ +-----------+-----------+ +-----------+-----------+
| [node01.srv.world] | | [node02.srv.world] | | [node03.srv.world] |
| Object Storage +----+ Object Storage +----+ Object Storage |
| Monitor Daemon | | | | |
| Manager Daemon | | | | |
+-----------------------+ +-----------------------+ +-----------------------+
|
|
For example, Create a block device and mount it on a Client Host.
|
|
| [1] | Transfer SSH public key to Client Host and Configure it from Admin Node. |
|
# transfer public key [root@node01 ~]# ssh-copy-id dlp # install required packages [root@node01 ~]# ssh dlp "yum -y install centos-release-ceph-nautilus" [root@node01 ~]# ssh dlp "yum -y install ceph-common"
# transfer required files to Client Host [root@node01 ~]# scp /etc/ceph/ceph.conf dlp:/etc/ceph/ ceph.conf 100% 195 98.1KB/s 00:00[root@node01 ~]# scp /etc/ceph/ceph.client.admin.keyring dlp:/etc/ceph/ ceph.client.admin.keyring 100% 151 71.5KB/s 00:00[root@node01 ~]# ssh dlp "chown ceph. /etc/ceph/ceph.*" |
| [2] | Create a Block device and mount it on a Client Host. |
|
# create default RBD pool [rbd] [root@dlp ~]# ceph osd pool create rbd 128 pool 'rbd' created # enable Placement Groups auto scale mode [root@dlp ~]# ceph osd pool set rbd pg_autoscale_mode on set pool 1 pg_autoscale_mode to on # initialize the pool [root@dlp ~]# rbd pool init rbd ceph osd pool autoscale-status POOL SIZE TARGET SIZE RATE RAW CAPACITY RATIO TARGET RATIO EFFECTIVE RATIO BIAS PG_NUM NEW PG_NUM AUTOSCALE rbd 6 3.0 239.9G 0.0000 1.0 128 32 on # create a block device with 10G [root@dlp ~]# rbd create --size 10G --pool rbd rbd01
# confirm [root@dlp ~]# rbd ls -l NAME SIZE PARENT FMT PROT LOCK rbd01 10 GiB 2
[root@dlp ~]#
rbd feature disable rbd01 object-map fast-diff deep-flatten
# map the block device [root@dlp ~]# rbd map rbd01 /dev/rbd0 # confirm [root@dlp ~]# rbd showmapped id pool namespace image snap device 0 rbd rbd01 - /dev/rbd0 # format with XFS [root@dlp ~]# mkfs.xfs /dev/rbd0
Discarding blocks...Done.
meta-data=/dev/rbd0 isize=512 agcount=16, agsize=163840 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=0, sparse=0
data = bsize=4096 blocks=2621440, imaxpct=25
= sunit=1024 swidth=1024 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=8 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
[root@dlp ~]#
[root@dlp ~]# mount /dev/rbd0 /mnt df -hT Filesystem Type Size Used Avail Use% Mounted on devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 1.9G 8.6M 1.9G 1% /run tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup /dev/mapper/centos-root xfs 26G 1.8G 25G 7% / /dev/vda1 xfs 1014M 319M 696M 32% /boot tmpfs tmpfs 379M 0 379M 0% /run/user/0 /dev/rbd0 xfs 10G 33M 10G 1% /mnt |
| [3] | For delete Block devices or Pools you created, run commands like follows. Data in Pools are all destroyed, so take backups before it if you need. For deleting Pools, it needs to set [mon allow pool delete = true] on [Monitor Daemon] configuration. |
|
# unmap [root@dlp ~]# rbd unmap /dev/rbd/rbd/rbd01
# delete a block device [root@dlp ~]# rbd rm rbd01 -p rbd Removing image: 100% complete...done. # delete a pool # ceph osd pool delete [Pool Name] [Pool Name] *** [root@dlp ~]# ceph osd pool delete rbd rbd --yes-i-really-really-mean-it pool 'rbd' removed |
| Sponsored Link |