|
[root@dlp ~]# bconsole
Connecting to Director localhost:9101
1000 OK: 10002 bacula-dir Version: 11.0.1 (05 February 2020)
Enter a period to cancel a command.
# set backup volume and so on
*label
Automatically selected Catalog: MyCatalog
Using Catalog "MyCatalog"
# select resource for backup
# follows are default and they have the same settings, backup data saved under [/tmp]
The defined Storage resources are:
1: File1
2: File2
Select Storage resource (1-2): 1
# Enter
Enter autochanger drive[0]:
# input any volume name
Enter new Volume name: Vol-20220719
Enter slot (0 or Enter for none):
# select a pool
Defined Pools:
1: Default
2: File
3: Scratch
Select the Pool (1-3): 2
Connecting to Storage daemon File1 at dlp.srv.world:9103 ...
Sending label command for Volume "Vol-20220719" Slot 0 ...
3000 OK label. VolBytes=228 VolABytes=0 VolType=1 Volume="Vol-20220719" Device="FileChgr1-Dev1" (/tmp)
Catalog record for Volume "Vol-20220719", Slot 0 successfully created.
Requesting to mount FileChgr1 ...
3906 File device ""FileChgr1-Dev1" (/tmp)" is always mounted.
You have messages.
# run backup job
*run
A job name must be specified.
# select job (follows are default)
The defined Job resources are:
1: BackupClient1
2: BackupCatalog
3: RestoreFiles
Select Job resource (1-3): 1
Run Backup job
JobName: BackupClient1
Level: Incremental
Client: bacula-fd
FileSet: Full Set
Pool: File (From Job resource)
Storage: File1 (From Job resource)
When: 2022-07-19 11:29:34
Priority: 10
OK to run? (yes/mod/no): yes
Job queued. JobId=1
# show messages (log)
*messages
19-Jul 11:30 bacula-dir JobId 1: No prior or suitable Full backup found in catalog. Doing FULL backup.
19-Jul 11:30 bacula-dir JobId 1: Start Backup JobId 1, Job=BackupClient1.2022-07-19_11.30.03_03
19-Jul 11:30 bacula-dir JobId 1: Using Device "FileChgr1-Dev1" to write.
19-Jul 11:30 bacula-sd JobId 1: Wrote label to prelabeled Volume "Vol-20220719" on File device "FileChgr1-Dev1" (/tmp)
19-Jul 11:30 bacula-sd JobId 1: Elapsed time=00:00:01, Transfer rate=913 Bytes/second
19-Jul 11:30 bacula-sd JobId 1: Sending spooled attrs to the Director. Despooling 899 bytes ...
19-Jul 11:30 bacula-dir JobId 1: Bacula bacula-dir 11.0.1 (05Feb20):
Build OS: x86_64-redhat-linux-gnu redhat
JobId: 1
Job: BackupClient1.2022-07-19_11.30.03_03
Backup Level: Full (upgraded from Incremental)
Client: "bacula-fd" 11.0.1 (05Feb20) x86_64-redhat-linux-gnu,redhat,
FileSet: "Full Set" 2022-07-19 11:30:03
Pool: "File" (From Job resource)
Catalog: "MyCatalog" (From Client resource)
Storage: "File1" (From Job resource)
Scheduled time: 19-Jul-2022 11:29:34
Start time: 19-Jul-2022 11:30:05
End time: 19-Jul-2022 11:30:05
Elapsed time: 1 sec
Priority: 10
FD Files Written: 5
SD Files Written: 5
FD Bytes Written: 446 (446 B)
SD Bytes Written: 913 (913 B)
Rate: 0.4 KB/s
Software Compression: None
Comm Line Compression: 0.8% 1.0:1
Snapshot/VSS: no
Encryption: no
Accurate: no
Volume name(s): Vol-20220719
Volume Session Id: 1
Volume Session Time: 1658197581
Last Volume Bytes: 1,673 (1.673 KB)
Non-fatal FD errors: 0
SD Errors: 0
FD termination status: OK
SD termination status: OK
Termination: Backup OK
19-Jul 11:30 bacula-dir JobId 1: Begin pruning Jobs older than 6 months .
19-Jul 11:30 bacula-dir JobId 1: No Jobs found to prune.
19-Jul 11:30 bacula-dir JobId 1: Begin pruning Files.
19-Jul 11:30 bacula-dir JobId 1: No Files found to prune.
19-Jul 11:30 bacula-dir JobId 1: End auto prune.
*exit
[root@dlp ~]#
total 4
drwx------. 3 root root 17 Jul 19 10:53 systemd-private-d3b1149a310a44809a705611ca12eae6-chronyd.service-UlTTNu
drwx------. 3 root root 17 Jul 19 10:53 systemd-private-d3b1149a310a44809a705611ca12eae6-dbus-broker.service-wfWRDe
drwx------. 3 root root 17 Jul 19 11:07 systemd-private-d3b1149a310a44809a705611ca12eae6-mariadb.service-zCBSBd
drwx------. 3 root root 17 Jul 19 10:53 systemd-private-d3b1149a310a44809a705611ca12eae6-systemd-logind.service-kLHyfw
-rw-r-----. 1 bacula tape 1673 Jul 19 11:30 Vol-20220719
# backup data just saved
|