Ceph Pacific : Use Block Device2022/03/31 |
|
Configure a Client Host [dlp] to use Ceph Storage like follows.
|
+--------------------+ |
| [dlp.srv.world] |10.0.0.30 |
| Ceph Client +-----------+
| | |
+--------------------+ |
+----------------------------+----------------------------+
| | |
|10.0.0.51 |10.0.0.52 |10.0.0.53
+-----------+-----------+ +-----------+-----------+ +-----------+-----------+
| [node01.srv.world] | | [node02.srv.world] | | [node03.srv.world] |
| Object Storage +----+ Object Storage +----+ Object Storage |
| Monitor Daemon | | | | |
| Manager Daemon | | | | |
+-----------------------+ +-----------------------+ +-----------------------+
|
|
For example, Create a block device and mount it on a Client Host.
|
|
| [1] | Transfer SSH public key to Client Host and Configure it from Admin Node. |
|
# transfer public key [root@node01 ~]# ssh-copy-id dlp # install required packages [root@node01 ~]# ssh dlp "dnf -y install centos-release-ceph-pacific" [root@node01 ~]# ssh dlp "dnf -y install ceph-common"
# transfer required files to Client Host [root@node01 ~]# scp /etc/ceph/ceph.conf dlp:/etc/ceph/ ceph.conf 100% 195 98.1KB/s 00:00[root@node01 ~]# scp /etc/ceph/ceph.client.admin.keyring dlp:/etc/ceph/ ceph.client.admin.keyring 100% 151 71.5KB/s 00:00[root@node01 ~]# ssh dlp "chown ceph. /etc/ceph/ceph.*" |
| [2] | Create a Block device and mount it on a Client Host. |
|
# create default RBD pool [rbd] [root@dlp ~]# ceph osd pool create rbd 64 pool 'rbd' created # enable Placement Groups auto scale mode [root@dlp ~]# ceph osd pool set rbd pg_autoscale_mode on set pool 2 pg_autoscale_mode to on # initialize the pool [root@dlp ~]# rbd pool init rbd ceph osd pool autoscale-status POOL SIZE TARGET SIZE RATE RAW CAPACITY RATIO TARGET RATIO EFFECTIVE RATIO BIAS PG_NUM NEW PG_NUM AUTOSCALE PROFILE device_health_metrics 0 3.0 239.9G 0.0000 1.0 1 on scale-up rbd 15 3.0 239.9G 0.0000 1.0 64 on scale-up # create a block device with 10G [root@dlp ~]# rbd create --size 10G --pool rbd rbd01
# confirm [root@dlp ~]# rbd ls -l AME SIZE PARENT FMT PROT LOCK rbd01 10 GiB 2 # map the block device [root@dlp ~]# rbd map rbd01 /dev/rbd0 # confirm [root@dlp ~]# rbd showmapped id pool namespace image snap device 0 rbd rbd01 - /dev/rbd0 # format with XFS [root@dlp ~]# mkfs.xfs /dev/rbd0
meta-data=/dev/rbd0 isize=512 agcount=16, agsize=163840 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=1 bigtime=1 inobtcount=1
data = bsize=4096 blocks=2621440, imaxpct=25
= sunit=16 swidth=16 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=16 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
[root@dlp ~]#
[root@dlp ~]# mount /dev/rbd0 /mnt df -hT Filesystem Type Size Used Avail Use% Mounted on devtmpfs devtmpfs 1.8G 0 1.8G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 745M 8.6M 737M 2% /run /dev/mapper/cs-root xfs 26G 2.0G 25G 8% / /dev/vda1 xfs 1014M 370M 645M 37% /boot tmpfs tmpfs 373M 0 373M 0% /run/user/0 /dev/rbd0 xfs 10G 105M 9.9G 2% /mnt |
| [3] | For delete Block devices or Pools you created, run commands like follows. For deleting Pools, it needs to set [mon allow pool delete = true] on [Monitor Daemon] configuration. |
|
# unmap [root@dlp ~]# rbd unmap /dev/rbd/rbd/rbd01
# delete a block device [root@dlp ~]# rbd rm rbd01 -p rbd Removing image: 100% complete...done. # delete a pool # ceph osd pool delete [Pool Name] [Pool Name] *** [root@dlp ~]# ceph osd pool delete rbd rbd --yes-i-really-really-mean-it pool 'rbd' removed |
| Sponsored Link |