Keepalived : Monitor processes2023/10/11

Monitoring processes with Keepalived.

This example is based on the environment like follows.

                            VIP:10.0.0.30
+----------------------+          |          +----------------------+
|  [node01.srv.world]  |10.0.0.51 | 10.0.0.52|  [node02.srv.world]  |
|     Keepalived#1     +----------+----------+     Keepalived#2     |
|                      |                     |                      |
+----------------------+                     +----------------------+

[1]	Configure basic Keepalived settings, refer to here.
[2]	For example, in addition to basic Keepalived settings, add settings to monitor sshd process.

root@node01:~#

vi /etc/keepalived/keepalived.conf

global_defs {
    router_id node01
    notification_email {
        root@localhost
    }
    notification_email_from root@node01.srv.world
    smtp_server localhost
    smtp_connect_timeout 30
}

# add monitoring setting for sshd process
vrrp_track_process track_sshd {
    process sshd
    delay 1
}

vrrp_instance VRRP1 {
    state MASTER
    # nopreempt
    interface enp1s0
    virtual_router_id 101
    priority 200
    advert_int 1
    virtual_ipaddress {
        10.0.0.30/24
    }
    # add
    track_process {
        track_sshd
    }
    smtp_alert
}

root@node01:~#

systemctl restart keepalived

[3]	That's OK. Verify failover and failback when sshd would be down.

# primary node

root@node01:~#

ip address show enp1s0

2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 52:54:00:35:69:7c brd ff:ff:ff:ff:ff:ff
    inet 10.0.0.51/24 brd 10.0.0.255 scope global enp1s0
       valid_lft forever preferred_lft forever
    inet 10.0.0.30/24 scope global secondary enp1s0
       valid_lft forever preferred_lft forever
    inet6 fe80::5054:ff:fe35:697c/64 scope link
       valid_lft forever preferred_lft forever

root@node01:~#

systemctl stop sshd

root@node01:~#

ip address show enp1s0

2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 52:54:00:35:69:7c brd ff:ff:ff:ff:ff:ff
    inet 10.0.0.51/24 brd 10.0.0.255 scope global enp1s0
       valid_lft forever preferred_lft forever
    inet6 fe80::5054:ff:fe35:697c/64 scope link
       valid_lft forever preferred_lft forever

root@node01:~#

ssh ubuntu@node02 "ip address show enp1s0"

ubuntu@node02's password:
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 52:54:00:7d:c5:e7 brd ff:ff:ff:ff:ff:ff
    inet 10.0.0.52/24 brd 10.0.0.255 scope global enp1s0
       valid_lft forever preferred_lft forever
    inet 10.0.0.30/24 scope global secondary enp1s0
       valid_lft forever preferred_lft forever
    inet6 fe80::5054:ff:fe7d:c5e7/64 scope link
       valid_lft forever preferred_lft forever

Matched Content