BIND : Configure Zone Files2024/04/29

Configure Zone Files for each Zone set in [named.conf].

Replace Network or Domain name on the example below to your own environment.

[1]

Create zone files that servers resolve IP address from Domain name.
The example below uses Internal network [10.0.0.0/24], Domain name [srv.world].
Replace to your own environment.

root@dlp:~#

vi /etc/bind/srv.world.lan

$TTL 86400
@   IN  SOA     dlp.srv.world. root.srv.world. (
        ;; any numerical values are OK for serial number
        ;; recommended : [YYYYMMDDnn] (update date + number)
        2024042901  ;Serial
        3600        ;Refresh
        1800        ;Retry
        604800      ;Expire
        86400       ;Minimum TTL
)
        ;; define Name Server
        IN  NS      dlp.srv.world.
        ;; define Name Server's IP address
        IN  A       10.0.0.30
        ;; define Mail Exchanger Server
        IN  MX 10   dlp.srv.world.

;; define each IP address of a hostname
dlp     IN  A       10.0.0.30
www     IN  A       10.0.0.31

[2]	Create zone files that servers resolve Domain name from IP address. The example below uses Internal network [10.0.0.0/24], Domain name [srv.world]. Replace to your own environment.

root@dlp:~#

vi /etc/bind/0.0.10.db

$TTL 86400
@   IN  SOA     dlp.srv.world. root.srv.world. (
        2024042901  ;Serial
        3600        ;Refresh
        1800        ;Retry
        604800      ;Expire
        86400       ;Minimum TTL
)
        ;; define Name Server
        IN  NS      dlp.srv.world.

;; define each hostname of an IP address
30      IN  PTR     dlp.srv.world.
31      IN  PTR     www.srv.world.

[3]	Next, Start BIND and Verify Name or Address Resolution, refer to here.

Matched Content