GlusterFS 5 : Replication Configuration2018/12/13 |
|
Configure Storage Clustering with GlusterFS.
For example, create a Replication volume with 2 servers.
This example shows to use 2 servers but it's possible to use more than 3 servers.
|
+----------------------+ | +----------------------+
| [GlusterFS Server#1] |10.0.0.51 | 10.0.0.52| [GlusterFS Server#2] |
| node01.srv.world +----------+----------+ node02.srv.world |
| | | |
+----------------------+ +----------------------+
|
|
It is recommended to use partitions for GlusterFS volumes which are different from the / partition.
The environment on this example is set as that sdb1 is mounted on [/glusterfs] directory for GlusterFS Configuration on all Nodes. |
|
| [1] | |
| [2] | Create a Directory for GlusterFS Volume on all Nodes. |
|
[root@node01 ~]# mkdir -p /glusterfs/replica |
| [3] | Configure Clustering like follows on a node. (it's OK on any node) |
|
# probe the node [root@node01 ~]# gluster peer probe node02 peer probe: success. # show status [root@node01 ~]# gluster peer status Number of Peers: 1 Hostname: node02 Uuid: 3dc44051-4139-4ff1-be53-329d4711afeb State: Peer in Cluster (Connected) # create volume [root@node01 ~]# gluster volume create vol_replica replica 2 transport tcp \ node01:/glusterfs/replica \ node02:/glusterfs/replica volume create: vol_replica: success: please start the volume to access data # start volume [root@node01 ~]# gluster volume start vol_replica volume start: vol_replica: success # show volume info [root@node01 ~]# gluster volume info Volume Name: vol_replica Type: Replicate Volume ID: 74ce1853-59fa-4c91-96b6-339d07439222 Status: Started Snapshot Count: 0 Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: node01:/glusterfs/replica Brick2: node02:/glusterfs/replica Options Reconfigured: performance.client-io-threads: off nfs.disable: on transport.address-family: inet |
| [4] |
| Sponsored Link |