OpenStack Rocky : Configure Neutron#5 (Compute Node)2018/08/31 |
|
Configure OpenStack Network Service (Neutron).
This example is not All in One Settings like here,
but Configure the 3 Nodes environment like follows. Neutron needs a plugin software,
it's possible to choose it from some softwares. This example chooses ML2 plugin. ( it uses Open vSwitch under the backend )
------------+---------------------------+---------------------------+------------
| | |
eth0|10.0.0.30 eth0|10.0.0.50 eth0|10.0.0.51
+-----------+-----------+ +-----------+-----------+ +-----------+-----------+
| [ Control Node ] | | [ Network Node ] | | [ Compute Node ] |
| | | | | |
| MariaDB RabbitMQ | | Open vSwitch | | Libvirt |
| Memcached httpd | | L2 Agent | | Nova Compute |
| Keystone Glance | | L3 Agent | | Open vSwitch |
| Nova API | | Metadata Agent | | L2 Agent |
| Neutron Server | | | | |
| Metadata Agent | | | | |
+-----------------------+ +-----------------------+ +-----------------------+
|
| [1] | Install Neutron services on Compute Node. |
|
[root@node01 ~]# yum --enablerepo=centos-openstack-rocky,epel -y install openstack-neutron openstack-neutron-ml2 openstack-neutron-openvswitch
|
| [2] | Configure as a Compute node. |
|
[root@node01 ~]# mv /etc/neutron/neutron.conf /etc/neutron/neutron.conf.org
[root@node01 ~]#
vi /etc/neutron/neutron.conf # create new [DEFAULT] core_plugin = ml2 service_plugins = router auth_strategy = keystone state_path = /var/lib/neutron allow_overlapping_ips = True # RabbitMQ connection info transport_url = rabbit://openstack:password@10.0.0.30 # Keystone auth info [keystone_authtoken] www_authenticate_uri = http://10.0.0.30:5000 auth_url = http://10.0.0.30:5000 memcached_servers = 10.0.0.30:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = neutron password = servicepassword [oslo_concurrency] lock_path = $state_path/lock chmod 640 /etc/neutron/neutron.conf [root@node01 ~]# chgrp neutron /etc/neutron/neutron.conf
[root@node01 ~]#
vi /etc/neutron/plugins/ml2/ml2_conf.ini # line 129: add ( it's OK with no value for "tenant_network_types" (set later if need) ) [ml2]
type_drivers = flat,vlan,gre,vxlan
tenant_network_types = mechanism_drivers = openvswitch,l2population extension_drivers = port_security
[root@node01 ~]#
vi /etc/neutron/plugins/ml2/openvswitch_agent.ini # line 308: add [securitygroup]
firewall_driver = openvswitch
enable_security_group = true enable_ipset = true
[root@node01 ~]#
vi /etc/nova/nova.conf # add follows into [DEFAULT] section use_neutron = True linuxnet_interface_driver = nova.network.linux_net.LinuxOVSInterfaceDriver firewall_driver = nova.virt.firewall.NoopFirewallDriver vif_plugging_is_fatal = True vif_plugging_timeout = 300 # add follows to the end: Neutron auth info # the value of metadata_proxy_shared_secret is the same with the one in metadata_agent.ini [neutron] auth_url = http://10.0.0.30:5000 auth_type = password project_domain_name = default user_domain_name = default region_name = RegionOne project_name = service username = neutron password = servicepassword service_metadata_proxy = True metadata_proxy_shared_secret = metadata_secret |
| [3] | If SELinux is enabled, change policy like follows. |
|
[root@node01 ~]# setsebool -P neutron_can_network on [root@node01 ~]# setsebool -P daemons_enable_cluster_mode on [root@node01 ~]# yum --enablerepo=centos-openstack-rocky -y install openstack-selinux |
| [4] | Start Neutron services. |
|
[root@node01 ~]# ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini [root@node01 ~]# systemctl start openvswitch [root@node01 ~]# systemctl enable openvswitch [root@node01 ~]# ovs-vsctl add-br br-int [root@node01 ~]# systemctl restart openstack-nova-compute [root@node01 ~]# systemctl start neutron-openvswitch-agent [root@node01 ~]# systemctl enable neutron-openvswitch-agent |
| Sponsored Link |