Squid : Configure Reverse Proxy2020/11/12

	Configure Squid as a Reverse Proxy Server.
[1]	Get SSL Certificate to receive HTTPS access, too, refer to here.
[2]	Configure Squid.

[root@prox ~]#

vi /etc/squid/squid.conf

# line 57: add (allow all http access)

http_access allow all

# And finally deny all other access to this proxy
http_access deny all

# line 62: specify the backend Web server

http_port 3128

http_port 80 accel defaultsite=www.srv.world
https_port 443 accel defaultsite=www.srv.world cert=/etc/letsencrypt/live/prox.srv.world/fullchain.pem key=/etc/letsencrypt/live/prox.srv.world/privkey.pem

# line 66: uncommnet

# number means ⇒ [disk cache size] [number of directories on top level] [number of directories on 2nd level]

cache_dir ufs /var/spool/squid 100 16 256

# add to the end

cache_peer www.srv.world parent 80 0 no-query originserver

# memory cache size

cache_mem 256 MB

# define hostname

visible_hostname prox.srv.world

[root@prox ~]#

systemctl enable --now squid

[3]	If Firewalld is running, allow HTTP/HTTPS services.

[root@prox ~]#

firewall-cmd --add-service={http,https} --permanent

success
[root@prox ~]#

firewall-cmd --reload

success

[4]	Change settings of DNS or Routers in your local network if need to listen HTTP/HTTPS access on Squid, then try to access to Squid Reverse Proxy Server from a ClientPC with Web browser like follows.

Matched Content