OpenStack Yoga : Configure Neutron (Compute Node)2022/04/04 |
Configure OpenStack Network Service (Neutron).
This example is not All in One Settings like here, but Configure the 3 Nodes environment like follows.
Neutron needs a plugin software, it's possible to choose it from some softwares. This example chooses ML2 plugin. ( it uses LinuxBridge under the backend ) ------------+---------------------------+---------------------------+------------ | | | eth0|10.0.0.30 eth0|10.0.0.50 eth0|10.0.0.51 +-----------+-----------+ +-----------+-----------+ +-----------+-----------+ | [ Control Node ] | | [ Network Node ] | | [ Compute Node ] | | | | | | | | MariaDB RabbitMQ | | L2 Agent | | Libvirt | | Memcached httpd | | L3 Agent | | Nova Compute | | Keystone Glance | | Metadata Agent | | L2 Agent | | Nova API | | | | | | Neutron Server | | | | | | Metadata Agent | | | | | +-----------------------+ +-----------------------+ +-----------------------+ |
[1] | Install Neutron services on Compute Node. |
root@node01:~# apt -y install neutron-common neutron-plugin-ml2 neutron-linuxbridge-agent
|
[2] | Configure Compute Node. |
root@node01:~# mv /etc/neutron/neutron.conf /etc/neutron/neutron.conf.org
root@node01:~#
vi /etc/neutron/neutron.conf # create new [DEFAULT] core_plugin = ml2 service_plugins = router auth_strategy = keystone state_path = /var/lib/neutron allow_overlapping_ips = True # RabbitMQ connection info transport_url = rabbit://openstack:password@10.0.0.30 [agent] root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf # Keystone auth info [keystone_authtoken] www_authenticate_uri = http://10.0.0.30:5000 auth_url = http://10.0.0.30:5000 memcached_servers = 10.0.0.30:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = neutron password = servicepassword [oslo_concurrency] lock_path = $state_path/lock chmod 640 /etc/neutron/neutron.conf root@node01:~# chgrp neutron /etc/neutron/neutron.conf
root@node01:~#
vi /etc/neutron/plugins/ml2/ml2_conf.ini # line 154 : add # OK with no value for [tenant_network_types] now (set later if need) [ml2]
type_drivers = flat,vlan,vxlan
tenant_network_types = mechanism_drivers = linuxbridge extension_drivers = port_security
root@node01:~#
vi /etc/neutron/plugins/ml2/linuxbridge_agent.ini # line 225 : add [securitygroup]
enable_security_group = True
firewall_driver = iptables enable_ipset = True # line 284 : add own IP address local_ip = 10.0.0.51
root@node01:~#
vi /etc/nova/nova.conf # add follows into [DEFAULT] section
vif_plugging_is_fatal = True
vif_plugging_timeout = 300 # add follows to the end: Neutron auth info # the value of [metadata_proxy_shared_secret] is the same with the one in [metadata_agent.ini]
[neutron]
auth_url = http://10.0.0.30:5000 auth_type = password project_domain_name = default user_domain_name = default region_name = RegionOne project_name = service username = neutron password = servicepassword service_metadata_proxy = True metadata_proxy_shared_secret = metadata_secret ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini root@node01:~# systemctl restart nova-compute neutron-linuxbridge-agent root@node01:~# systemctl enable neutron-linuxbridge-agent |
Sponsored Link |