GlusterFS 7 : Add Nodes (Bricks)2020/05/05 |
|
Add Nodes (Bricks) to existing Cluster.
For example, Add a Node [node03] to the existing Cluster like follows.
|
+----------------------+ | +----------------------+
| [GlusterFS Server#1] |10.0.0.51 | 10.0.0.52| [GlusterFS Server#2] |
| node01.srv.world +----------+----------+ node02.srv.world |
| | | | |
+----------------------+ | +----------------------+
⇑ | ⇑
file1, file3 ... | file2, file4 ...
|
+----------------------+ |
| [GlusterFS Server#3] |10.0.0.53 |
| node03.srv.world +----------+
| |
+----------------------+
|
| [1] |
Install GlusterFS to a New Node, refer to here,
and then Create a directory for GlusterFS volume on the same Path with other Nodes.
|
| [2] | Add a New Node to existing Cluster on a node. (OK on any existing node) |
|
# probe new node [root@node01 ~]# gluster peer probe node03 peer probe: success. # confirm status [root@node01 ~]# gluster peer status Number of Peers: 2 Hostname: node02 Uuid: f7dbd6bb-1628-4ddf-b71f-5e50b72f9766 State: Peer in Cluster (Connected) Hostname: node03 Uuid: 106993f4-8481-4558-9faf-0b90a665eaa0 State: Peer in Cluster (Connected) # confirm existing volume [root@node01 ~]# gluster volume info Volume Name: vol_distributed Type: Distribute Volume ID: 8105ff9b-dcef-4b26-a5c4-46f5d79e9f05 Status: Started Snapshot Count: 0 Number of Bricks: 2 Transport-type: tcp Bricks: Brick1: node01:/glusterfs/distributed Brick2: node02:/glusterfs/distributed Options Reconfigured: transport.address-family: inet storage.fips-mode-rchecksum: on nfs.disable: on # add new node [root@node01 ~]# gluster volume add-brick vol_distributed node03:/glusterfs/distributed volume add-brick: success # confirm volume info [root@node01 ~]# gluster volume info Volume Name: vol_distributed Type: Distribute Volume ID: 8105ff9b-dcef-4b26-a5c4-46f5d79e9f05 Status: Started Snapshot Count: 0 Number of Bricks: 3 Transport-type: tcp Bricks: Brick1: node01:/glusterfs/distributed Brick2: node02:/glusterfs/distributed Brick3: node03:/glusterfs/distributed Options Reconfigured: transport.address-family: inet storage.fips-mode-rchecksum: on nfs.disable: on # after adding new node, run rebalance volume [root@node01 ~]# gluster volume rebalance vol_distributed fix-layout start volume rebalance: vol_distributed: success: Rebalance on vol_distributed has been started successfully. Use rebalance status command to check status of the rebalance process. ID: 158ad8fb-9068-4b3e-9992-5b4d2632b619 |
| Sponsored Link |