Windows Server Backup : Restoring System2022/12/23 |
If Windows has some troubles or never start, Restoring System from Backup like follows.
It needs Windows Installation media. |
[1] | Set Windows Installation media on your computer and restart it. After displaying the screen like follows, Click [Next] button. |
[2] | Click [Repair your computer]. |
[3] | Click [Troubleshoot]. |
[4] | If Backups exist in local disk on your computer, Click [System Image Recovery]. If Backups exist on remote computer, Click [Command Prompt] to enable networking. |
[5] | Input [wpeinit] command to enable networking. If DHCP server exists in your local network, IP address is assigned and networking is enabled. |
[6] | If DHCP server does not exist in your local network, set static IP address like follows. ⇒ netsh interface ip set address (interface number) static (IP address) (subnet mask) (default gateway) |
[7] | After enabling networking if needed, Click [System Image Recovery]. |
[8] | Click [Windows Server]. |
[8] | If Backups don't exist on local disk, following message is shown. Click [Cancel] button. |
[9] | Click [Next] button. |
[10] | Click [Adbanced...] button. |
[11] | Click [Search for a system image on the network]. |
[12] | Read well the wargings and Click [Yes] button. |
[13] | Specify the location of Backup Image and Click [OK] button. |
[14] | Input credentials to access to shared folder if needed. |
[15] | Click [Next] button. |
[16] | Select the date of backup to recover the System. |
[17] | Choose addtional restore oprions. |
[18] | Click [Finish] button to start recovery task. |
[19] | Read well the wargings and Click [Yes] button. |
[20] | Recovery task starts. |
[21] | After finishing recovery task, computer will restart automatically. That's OK if Windows would start normally. |
Sponsored Link |