Debian 12 bookworm
Sponsored Link

OpenStack Zed : Neutron Network (FLAT)2023/06/28

 
Configure virtual networking by OpenStack Network Service (Neutron).
For example, configure FLAT type of networking on here.
Before it, Configure basic settings on Control Node, Network Node, Compute Node.
Furthermore, this example is based on the environment that Network Node and Compute Node have 2 network interfaces.
And also [eth1] is up without IP Address, refer to here of [1] to up anonymous interface on Netplan.
------------+--------------------------+--------------------------+------------
            |                          |                          |
        eth0|10.0.0.30             eth0|10.0.0.50             eth0|10.0.0.51
+-----------+-----------+  +-----------+-----------+  +-----------+-----------+
|   [ dlp.srv.world ]   |  | [ network.srv.world ] |  |  [ node01.srv.world ] |
|     (Control Node)    |  |     (Network Node)    |  |     (Compute Node)    |
|                       |  |                       |  |                       |
|  MariaDB    RabbitMQ  |  |  Neutron L2/L3 Agent  |  |        Libvirt        |
|  Memcached  Nginx     |  |   Neutron Metadata    |  |      Nova Compute     |
|  Keystone   httpd     |  |     Open vSwitch      |  |    Neutron L2 Agent   |
|  Glance     Nova API  |  |                       |  |      Open vSwitch     |
|  Neutron Server       |  |                       |  |                       |
|  Neutron Metadata     |  |                       |  |                       |
+-----------------------+  +-----------+-----------+  +-----------+-----------+
                                   eth1|(UP with no IP)       eth1|(UP with no IP)

[1] Change settings like follows on both Network Node and Compute Node.
# add bridge

root@network:~#
ovs-vsctl add-br br-eth1

root@network:~#
ip link set br-eth1 up

root@network:~#
echo -e '\nauto br-eth1\niface br-eth1 inet manual' >> /etc/network/interfaces
# add [eth1] to the port of the bridge above
# replace the interface name [eth1] to your own environment

root@network:~#
ovs-vsctl add-port br-eth1 eth1
root@network:~#
vi /etc/neutron/plugins/ml2/ml2_conf.ini
# add a line under [ml2_type_flat] section

[ml2_type_flat]
flat_networks = physnet1
root@network:~#
vi /etc/neutron/plugins/ml2/openvswitch_agent.ini
# add a line undet [ovs] section

[ovs]
bridge_mappings = physnet1:br-eth1
root@network:~#
systemctl restart neutron-openvswitch-agent

[2] Create network. It's OK to work on any node. (example below is on Control Node)
root@dlp ~(keystone)#
projectID=$(openstack project list | grep service | awk '{print $2}')
# create network named [sharednet1]

root@dlp ~(keystone)#
openstack network create --project $projectID \
--share --provider-network-type flat --provider-physical-network physnet1 sharednet1

+---------------------------+--------------------------------------+
| Field                     | Value                                |
+---------------------------+--------------------------------------+
| admin_state_up            | UP                                   |
| availability_zone_hints   |                                      |
| availability_zones        |                                      |
| created_at                | 2023-06-28T04:41:20Z                 |
| description               |                                      |
| dns_domain                | None                                 |
| id                        | 6ec54251-7d1b-4da1-9c36-6fe4ea527b79 |
| ipv4_address_scope        | None                                 |
| ipv6_address_scope        | None                                 |
| is_default                | False                                |
| is_vlan_transparent       | None                                 |
| mtu                       | 1500                                 |
| name                      | sharednet1                           |
| port_security_enabled     | True                                 |
| project_id                | d8b09d86ed7743039f92b2e542ea26c1     |
| provider:network_type     | flat                                 |
| provider:physical_network | physnet1                             |
| provider:segmentation_id  | None                                 |
| qos_policy_id             | None                                 |
| revision_number           | 1                                    |
| router:external           | Internal                             |
| segments                  | None                                 |
| shared                    | True                                 |
| status                    | ACTIVE                               |
| subnets                   |                                      |
| tags                      |                                      |
| updated_at                | 2023-06-28T04:41:20Z                 |
+---------------------------+--------------------------------------+

# create subnet [10.0.0.0/24] in [sharednet1]

root@dlp ~(keystone)#
openstack subnet create subnet1 --network sharednet1 \
--project $projectID --subnet-range 10.0.0.0/24 \
--allocation-pool start=10.0.0.200,end=10.0.0.254 \
--gateway 10.0.0.1 --dns-nameserver 10.0.0.10

+----------------------+--------------------------------------+
| Field                | Value                                |
+----------------------+--------------------------------------+
| allocation_pools     | 10.0.0.200-10.0.0.254                |
| cidr                 | 10.0.0.0/24                          |
| created_at           | 2023-06-28T04:41:50Z                 |
| description          |                                      |
| dns_nameservers      | 10.0.0.10                            |
| dns_publish_fixed_ip | None                                 |
| enable_dhcp          | True                                 |
| gateway_ip           | 10.0.0.1                             |
| host_routes          |                                      |
| id                   | 6843ef10-c9c6-412f-8a2e-92de79764e47 |
| ip_version           | 4                                    |
| ipv6_address_mode    | None                                 |
| ipv6_ra_mode         | None                                 |
| name                 | subnet1                              |
| network_id           | 6ec54251-7d1b-4da1-9c36-6fe4ea527b79 |
| project_id           | d8b09d86ed7743039f92b2e542ea26c1     |
| revision_number      | 0                                    |
| segment_id           | None                                 |
| service_types        |                                      |
| subnetpool_id        | None                                 |
| tags                 |                                      |
| updated_at           | 2023-06-28T04:41:50Z                 |
+----------------------+--------------------------------------+

# confirm settings

root@dlp ~(keystone)#
openstack network list

+--------------------------------------+------------+--------------------------------------+
| ID                                   | Name       | Subnets                              |
+--------------------------------------+------------+--------------------------------------+
| 6ec54251-7d1b-4da1-9c36-6fe4ea527b79 | sharednet1 | 6843ef10-c9c6-412f-8a2e-92de79764e47 |
+--------------------------------------+------------+--------------------------------------+
[3] Create and start a Virtual machine Instance with the network just created above.
# confirm available [flavor] list

debian@dlp ~(keystone)$
openstack flavor list

+----+-----------+------+------+-----------+-------+-----------+
| ID | Name      |  RAM | Disk | Ephemeral | VCPUs | Is Public |
+----+-----------+------+------+-----------+-------+-----------+
| 1  | m1.small  | 2048 |   10 |         0 |     1 | True      |
| 2  | m1.medium | 4096 |   10 |         0 |     2 | True      |
| 3  | m1.large  | 8192 |   10 |         0 |     4 | True      |
| 4  | m2.large  | 8192 |   10 |        10 |     4 | True      |
| 5  | m3.large  | 8192 |   20 |         0 |     4 | True      |
+----+-----------+------+------+-----------+-------+-----------+

# confirm available image list

debian@dlp ~(keystone)$
openstack image list

+--------------------------------------+----------+--------+
| ID                                   | Name     | Status |
+--------------------------------------+----------+--------+
| 3a660af6-3f41-4c0f-b2a8-55127dfc3c60 | Debian12 | active |
+--------------------------------------+----------+--------+

# confirm available network list

debian@dlp ~(keystone)$
openstack network list

+--------------------------------------+------------+--------------------------------------+
| ID                                   | Name       | Subnets                              |
+--------------------------------------+------------+--------------------------------------+
| 6ec54251-7d1b-4da1-9c36-6fe4ea527b79 | sharednet1 | 6843ef10-c9c6-412f-8a2e-92de79764e47 |
+--------------------------------------+------------+--------------------------------------+

# create a security group for instances

debian@dlp ~(keystone)$
openstack security group create secgroup01

+-----------------+-----------------------------------------------------------------------------+
| Field           | Value                                                                       |
+-----------------+-----------------------------------------------------------------------------+
| created_at      | 2023-06-28T04:47:25Z                                                        |
| description     | secgroup01                                                                  |
| id              | bd1040a7-caab-477e-a1bb-add49bb8f16a                                        |
| name            | secgroup01                                                                  |
| project_id      | 1c2f5dc8c4f9494fbaaa4217c8e3585a                                            |
| revision_number | 1                                                                           |
| rules           | created_at='2023-06-28T04:47:25Z', direction='egress', ethertype='IPv4',... |
|                 | created_at='2023-06-28T04:47:25Z', direction='egress', ethertype='IPv6',... |
| stateful        | True                                                                        |
| tags            | []                                                                          |
| updated_at      | 2023-06-28T04:47:25Z                                                        |
+-----------------+-----------------------------------------------------------------------------+

# create an SSH keypair for connecting to instances

debian@dlp ~(keystone)$
ssh-keygen -q -N ""

Enter file in which to save the key (/home/debian/.ssh/id_rsa):
# add public-key

debian@dlp ~(keystone)$
openstack keypair create --public-key ~/.ssh/id_rsa.pub mykey

+-------------+-------------------------------------------------+
| Field       | Value                                           |
+-------------+-------------------------------------------------+
| created_at  | None                                            |
| fingerprint | 7d:e7:1f:33:80:d7:85:02:43:a9:07:52:b5:cd:be:3d |
| id          | mykey                                           |
| is_deleted  | None                                            |
| name        | mykey                                           |
| type        | ssh                                             |
| user_id     | de51d5f0ee2c485885877d21f5b424e0                |
+-------------+-------------------------------------------------+

debian@dlp ~(keystone)$
netID=$(openstack network list | grep sharednet1 | awk '{ print $2 }')

debian@dlp ~(keystone)$
openstack server create --flavor m1.medium --image Debian12 --security-group secgroup01 --nic net-id=$netID --key-name mykey Debian-12
debian@dlp ~(keystone)$
openstack server list

+--------------------------------------+-----------+--------+-----------------------+----------+-----------+
| ID                                   | Name      | Status | Networks              | Image    | Flavor    |
+--------------------------------------+-----------+--------+-----------------------+----------+-----------+
| 83cb43d6-1078-4a52-9530-2fa6f2d94a4c | Debian-12 | ACTIVE | sharednet1=10.0.0.233 | Debian12 | m1.medium |
+--------------------------------------+-----------+--------+-----------------------+----------+-----------+
[4] Configure security settings for the security group you created above to access with SSH and ICMP.
# permit ICMP

debian@dlp ~(keystone)$
openstack security group rule create --protocol icmp --ingress secgroup01

+-------------------------+--------------------------------------+
| Field                   | Value                                |
+-------------------------+--------------------------------------+
| created_at              | 2023-06-28T04:50:12Z                 |
| description             |                                      |
| direction               | ingress                              |
| ether_type              | IPv4                                 |
| id                      | 3c94d258-49ad-4074-9674-f5ab2f857881 |
| name                    | None                                 |
| port_range_max          | None                                 |
| port_range_min          | None                                 |
| project_id              | 1c2f5dc8c4f9494fbaaa4217c8e3585a     |
| protocol                | icmp                                 |
| remote_address_group_id | None                                 |
| remote_group_id         | None                                 |
| remote_ip_prefix        | 0.0.0.0/0                            |
| revision_number         | 0                                    |
| security_group_id       | bd1040a7-caab-477e-a1bb-add49bb8f16a |
| tags                    | []                                   |
| updated_at              | 2023-06-28T04:50:12Z                 |
+-------------------------+--------------------------------------+

# permit SSH

debian@dlp ~(keystone)$
openstack security group rule create --protocol tcp --dst-port 22:22 secgroup01

+-------------------------+--------------------------------------+
| Field                   | Value                                |
+-------------------------+--------------------------------------+
| created_at              | 2023-06-28T04:50:30Z                 |
| description             |                                      |
| direction               | ingress                              |
| ether_type              | IPv4                                 |
| id                      | 7dcb363a-130b-4c0a-a0b3-17e1ad4ab3c5 |
| name                    | None                                 |
| port_range_max          | 22                                   |
| port_range_min          | 22                                   |
| project_id              | 1c2f5dc8c4f9494fbaaa4217c8e3585a     |
| protocol                | tcp                                  |
| remote_address_group_id | None                                 |
| remote_group_id         | None                                 |
| remote_ip_prefix        | 0.0.0.0/0                            |
| revision_number         | 0                                    |
| security_group_id       | bd1040a7-caab-477e-a1bb-add49bb8f16a |
| tags                    | []                                   |
| updated_at              | 2023-06-28T04:50:30Z                 |
+-------------------------+--------------------------------------+

debian@dlp ~(keystone)$
openstack security group rule list secgroup01

+--------------------------------------+-------------+-----------+-----------+------------+-----------+-----------------------+----------------------+
| ID                                   | IP Protocol | Ethertype | IP Range  | Port Range | Direction | Remote Security Group | Remote Address Group |
+--------------------------------------+-------------+-----------+-----------+------------+-----------+-----------------------+----------------------+
| 3c94d258-49ad-4074-9674-f5ab2f857881 | icmp        | IPv4      | 0.0.0.0/0 |            | ingress   | None                  | None                 |
| 3d38e938-713c-47c6-8a97-ada9d5a734c8 | None        | IPv4      | 0.0.0.0/0 |            | egress    | None                  | None                 |
| 7dcb363a-130b-4c0a-a0b3-17e1ad4ab3c5 | tcp         | IPv4      | 0.0.0.0/0 | 22:22      | ingress   | None                  | None                 |
| c11e0dd7-6758-4cf7-b3f2-11359b1a6dea | None        | IPv6      | ::/0      |            | egress    | None                  | None                 |
+--------------------------------------+-------------+-----------+-----------+------------+-----------+-----------------------+----------------------+
[5] Login to Instance.
debian@dlp ~(keystone)$
ssh debian@10.0.0.233

The authenticity of host '10.0.0.233 (10.0.0.233)' can't be established.
ED25519 key fingerprint is SHA256:phXOxksramH0+duqQbpQtP07Pj8J1/f2vKv/v7hL8QI.
This key is not known by any other names.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '10.0.0.233' (ED25519) to the list of known hosts.
Linux debian-12 6.1.0-9-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.27-1 (2023-05-08) x86_64

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Tue Jun 27 23:52:21 2023
debian@debian-12:~$     # logined
Matched Content