PXE Server Configuration2010/06/18 |
| Build PXE (Preboot eXecution Environment) Server. It's necessarry your computer has a NIC with PXE surpport. |
|
| [1] | Install some packages that is required for PXE server. |
|
[root@dlp ~]# yum -y install system-config-netboot syslinux xinetd tftp-server
|
| [2] | Run TFTP server |
|
[root@dlp ~]# vi /etc/xinetd.d/tftp # line 14: change disable = no [root@dlp ~]# /etc/rc.d/init.d/xinetd start Starting xinetd: [ OK ] [root@dlp ~]# chkconfig xinetd on
|
| [3] | Run DHCP server. Configure Basic Configuration first and add following config too. |
|
[root@dlp ~]# vi /etc/dhcpd.conf option domain-name-servers 10.0.0.5; # add near line 13 filename "/linux-install/pxelinux.0"; next-server 10.0.0.5; # IP address for PXE server [root@dlp ~]# /etc/rc.d/init.d/dhcpd restart Shutting down dhcpd: [ OK ] Starting dhcpd: [ OK ] |
| [4] | Basic PXE configuration is done.
If you'd like to network-install to Client, see here.
or
If you'd like to boot client that has no disk from network, See here. |
| Sponsored Link |