BIND起動/動作確認2011/03/14 |
| [1] | BINDを起動します。 |
|
[root@dlp ~]# /etc/rc.d/init.d/named start Starting named: [ OK ] [root@dlp ~]# chkconfig named on |
| [2] | 名前解決の参照先を変更しておきます。 |
|
[root@dlp ~]#
vi /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
[root@dlp ~]# HWADDR="00:22:68:3D:82:88" ONBOOT="yes" BOOTPROTO=none IPADDR=10.0.0.30 NETMASK=255.255.255.0 TYPE=Ethernet GATEWAY=10.0.0.1 # 自身のIPアドレスに変更 DNS1= 10.0.0.30 IPV6INIT=no USERCTL=no /etc/rc.d/init.d/network restart Shutting down interface eth0: [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ]
|
| [3] | 正常に名前解決ができるかどうかの動作確認を行います。 |
|
[root@dlp ~]#
; <<>> DiG 9.7.0-P2-RedHat-9.7.0-5.P2.el6_0.1 <<>> dlp.srv.world.dig dlp.srv.world. ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 55708
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0
;; QUESTION SECTION:
;dlp.srv.world.
;; ANSWER SECTION:IN A
dlp.srv.world.
;; AUTHORITY SECTION:86400 IN A 10.0.0.30 # 正常応答
srv.world.
;; Query time: 0 msec86400 IN NS dlp.srv.world. ;; SERVER: 10.0.0.30#53(10.0.0.30) ;; WHEN: Mon Mar 14 20:51:05 2011
;; MSG SIZE rcvd: 64
[root@dlp ~]#
; <<>> DiG 9.7.0-P2-RedHat-9.7.0-5.P2.el6_0.1 <<>> -x 10.0.0.30dig -x 10.0.0.30 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 61903
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 1
;; QUESTION SECTION:
;30.0.0.10.in-addr.arpa.
;; ANSWER SECTION:IN PTR
30.0.0.10.in-addr.arpa.
;; AUTHORITY SECTION:86400 IN PTR dlp.srv.world. # 正常応答
0.0.10.in-addr.arpa.
;; ADDITIONAL SECTION:86400 IN NS dlp.srv.world.
dlp.srv.world.
;; Query time: 0 msec86400 IN A 10.0.0.30 ;; SERVER: 10.0.0.30#53(10.0.0.30) ;; WHEN: Mon Mar 14 20:52:11 2011 ;; MSG SIZE rcvd: 100 |
| Sponsored Link |